![]() I will admit that the minute you put on FPV goggles you are really in the craft you are flying. Detachable AC and DC power cords and 1S battery extension leads included.Built-in protection features guard against short circuit, over current and reverse polarity.Each port is suitable for charging one 30–150mAh, 1S UM cell, a 1S MCPX cell, or one 120–300mAh 2S pack equipped with a JST-PH, 3-wire connector.Five selectable charge rates from 0.1–1.0A.Four independently functioning charge circuits each with a simple LED status display.Works with Blade®, E-flite and ParkZone 1S as well as 2S ultra micro Li-Po batteries.All four ports can be used simultaneously or one at a time.This is a charger that doesn't cost much but does a lot.The cost of $54.99 is totally acceptable for this battery solution. ![]() One option is the Ultra Micro-4, 4x9W, AC/DC charger.(EFLC1105A) This is a great way to charge all your packs at once, or keep your packs going while your flying. That means you need a real charger for all those packs. We found out real quick that one battery is not enough for real house FPVing. It is capable of receiving on 40 channels and can be clipped on to the MLP4 radio for hands free operation.Ĭharge Those Batteries - Ultra Micro-4 Battery Charger (EFLC1105A) The monitor is rechargeable via micro USB and has a 1.5hr run time before it needs to recharge. I'm pretty picky about how I fly FPV but this monitor by itself does a good job for flying around the house. The included FPV monitor is a 4.3" Spektrum SPMVM430. The monitor mounts on the transmitter and was fine for some home FPV sessions.The included 200 mAh battery gives you around 4 minutes of flight time. The flight control system is tweaked for better control in stability mode and agility mode is now much more controllable as well. The FPV version comes equipped with high performance 14,300Kv motors. The added weight of the camera requires more power. The video range of the Inductrix FPV is nearly 100 yards line of sight and more than adequate to fly in any large buildings or homes. This thing also has a nice antenna that you don't have to worry about breaking. The body has a 5.8 video transmitter and camera built in and they are protected by an external shell. The Inductrix FPV is equipped with a 25mW video transmitter that is perfect for indoor use. It helps prevent over controlling the Inductrix and gives you a confident feeling when maneuvering through tight spaces (watch my video for some of that). The newly improved Stability mode allows for fast forward flight even with the added weight of the FPV system. ![]() Sensor Assisted Flight Envelope technology is Horizon's stabilization and protection system that allows you to be a successful FPV pilot. ![]() Things weren't so simple a few years ago! ![]() The quad, the camera, the video transmitter, an LCD screen with built in receiver and the Tx. This has everything in the box you will need to actually fly first person. The other way to look at it is what would a newbie have to buy, and or learn, to get this going. The Inductrux FPV RTF is a pretty good deal when you do the math of building one of these yourself. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |